/ Production from the Best Russian manufacturers /
Image Intensifiers Tubes
In Generation 2 and 3 systems, the objective lens collects light that you cannot see with your naked eye and focuses it on the image intensifier. Inside the image intensifier a photocathode absorbs this energy and converts it to electrons. These electrons are then drawn toward a phosphor screen but first pass through a microchannel plate that intensifies them thousands of times. When this highly intensified electron image strikes the phosphor screen, it causes the screen to emit light that you can see. Since the phosphor screen emits this light in exactly the same pattern and degrees of intensity as the light collected by the objective lens, the bright nighttime image you see in the eyepiece corresponds precisely to the outside scene you are viewing.
Gen 2+ glass tubes
Generation II+ 18mm
EPM108G-10-22) format Glass Image Intensifier Tubes produced by Katod JSC and
produced by Ekran-FEP Ltd.
Gen 2+ non-inverting tubes
Generation II+ 18mm (EPM105G-03) and 25mm (EPM108G) format Non-inverting Image Intensifier Tubes
Gen 2+ inverting tubes
Generation II+ 18mm (EPM105G-01-22,
105G-02-22) and 25mm (EPM105G-01-22, 105G-02-22) format inverting Image Intensifier Tubes
Gen 3 glass tubes
Image Intensifiers EPM102G-05-22A, EPM102G-05-22B, EPM102G-05-22Ρ
3nd generation, double proximity focused, 18 mm tube with glass input and output.
Gen 3 non-inverting tubes
EPM 102G-03/1/2/3-32 series tubes give you a high quality, every detail picture without blurring in the whole vision area. Night vision devices on the base of Gen III IIT perform even in extremely dark conditions.
Gen 3 inverting tubes
EPM 101G-01/02-11 series tubes give you a high quality, every detail picture without blurring in the whole vision area. Night vision devices on the base of Gen III IIT perform
even in extremely dark conditions.